Switch Led State Indicators - Avaya 4826GTS Installing Manual

Ethernet routing switch 4800 series
Hide thumbs Also See for 4826GTS:
Table of Contents

Advertisement

1. USB Port
2. Switch LEDs
3. 10/100/1000 PoE+ ports (LEDs above ports)
Warning:
Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into
an optical fiber or connector port. Always assume that fiber-optic cables are connected to a light
source. For a translation of this statement, see

Switch LED state indicators

The following table describes the main switch LED state indications provided by LED color and
fluctuation cues.
Table 8: Switch LED state indicators
Label
Color and Status
PWR
Green (solid)
Off
Status
Green (solid)
Green (blinking)
Amber (solid)
Amber (blinking)
Off
Up / Down
Green (solid)
Green (blinking)
Amber (solid)
Off
August 2016
4. Shared SFP ports and SFP+ ports. SFP ports can
support low speed 100FX SFP
5. Console Port
Translations of safety messages
Description
The switch is receiving power either from the primary or
secondary power supply.
The switch is not receiving power and not operating.
• During start-up: The power-on self-test (POST) is complete
and the switch is operating normally.
• After start-up: The switch is running the agent code
successfully.
The switch is loading the agent software code.
The switch encountered an error when running the diagnostic
software. (See note)
The switch is booting and running diagnostic software. Normal
activity during boot process. (See note)
The switch failed the power-on self-test (POST) or failed to load
the agent code.
The switch formed a neighbor with the adjacent switch over
Stack up/down cables.
The switch formed a partial neighbor with the adjacent switch
over Stack up/down cables. Check the switch logs.
The switch detects Stack up/down cables are present and
connected to an adjacent switch, but adjacency did not
complete. Check the switch logs.
No Stack up/down connection is present, or the switch is in
stand-alone mode.
Installing Avaya ERS 4800 Series
Comments on this document? infodev@avaya.com
Check Light Emitting Diode on the switch
on page 45.
Table continues...
25

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

4826gts-pwr+4850gts4850gts-pwr+

Table of Contents