Package Contents - Avaya 4826GTS Installing Manual

Environmental requirement
Operating Temperature
Storage Temperature
Operating Humidity
Operating Relative Humidity
Storage Relative Humidity
Maximum Operating Altitude
Altitude
Storage Altitude
Acoustic Noise
Miscellaneous Operating
Considerations
Warning:
To avoid bodily injury from hazardous electrical shock and current, never remove the top of the
device. No user-serviceable components are inside. For a translation of this statement, see
Translations of safety messages

Package contents

The following figure illustrates the components that are provided with each switch. If any
components are missing, contact the switch vendor.
Note:
Avaya switch hardware can vary in size and shape. Your switch might appear different than the
following example figure.
August 2016
Values
0°C to 50°C
–40°C to 85°C
0 to 95 percent noncondensing
10 to 90 percent noncondensing
10 to 90 percent noncondensing
10 000 feet above sea level
0 to 10 000 feet above sea level
–1 000 to 40 000 feet above sea level
Less than or equal to 45 db at 35°C and less than or equal to 57 db at
50°C. The temperature is allowed to have ±3.5°C deviation around the
threshold of 35°C, (measurement methods based on ISO 7779).
• No heat sources such as hot air vents or direct sunlight near the
switch.
• No sources of severe electromagnetic interference near the switch.
• No excessive dust in the environment.
• An adequate power source is within 6 feet (1.83 meters) of the switch.
One 15-amp circuit is required for each power supply.
• At least 2 inches (5.08 centimeters) of clearance on each side of the
switch unit for ventilation.
• Adequate clearance at the front and rear of the switch for access to
cables.
on page 45.
Installing Avaya ERS 4800 Series
Comments on this document? infodev@avaya.com
Package contents
9