Check Light Emitting Diode On The Switch; Front Panel Leds - Avaya 4826GTS Installing Manual

Warning:
Disconnecting the AC power cord is the only way to turn off AC power to the switch. Always
connect the AC power cord in a quickly and safely accessible location in case of an emergency.
For a translation of this statement, see

Check Light Emitting Diode on the switch

The figures and tables in the following sections describe the LEDs on the switch. The tables
describe LED operation for a switch that finishes the power-on self-test.

Front panel LEDs

The following diagrams illustrate the components on the front panels of the switch:
For detailed explanations of the states indicated by each front panel LED type, see the following
sections:
• Switch LED state indicators
• Port LED state indicators
Figure 7: Avaya Ethernet Routing Switch 4826GTS
1. USB Port
2. Switch LEDs
3. 10/100/1000 ports (LEDs above ports)
August 2016
Translations of safety messages
on page 25
on page 26
4. Shared SFP ports and SFP+ ports. SFP ports can
support low speed 100FX SFP
5. Console Port
Installing Avaya ERS 4800 Series
Comments on this document? infodev@avaya.com
Check Light Emitting Diode on the switch
on page 45.
23