Cable Requirements - Avaya 4826GTS Installing Manual

2. Slide the switch into the rack as illustrated.
3. Insert and tighten the rack-mount screws using a #2 Phillips screwdriver.
Note:
The switch mounting hardware is specific for each switch model. Do not mix screws or brackets
between different switch models.

Cable requirements

The following table describes the cables required for ERS 4800.
Table 3: Switch cable requirements
Required Cable
10/100/1000Base TX Ports
August 2016
Description
The interconnect cabling must conform to the Cat5e, Cat6, or Cat6e
specification of the Commercial Building Telecommunications Cabling
Standard, ANSI/TIA/EIA 568-B fitted with an RJ-45 Module jack.
Installing Avaya ERS 4800 Series
Comments on this document? infodev@avaya.com
Cable requirements
Table continues...
13