Problems And Solutions - HP Photosmart R507 User Manual

Problems and Solutions

Problem
The camera
does not
turn on.
Downloaded From camera-usermanual.com HP Manuals
Chapter 7: Troubleshooting and Support
Possible cause
The battery is
functioning
incorrectly, is
dead, is
installed
incorrectly, or
is missing.
If you are using
the HP AC
power adapter,
it is not
connected to
the camera, or
is not plugged
into a power
outlet.
The HP AC
power adapter
is not
functioning
correctly.
The camera
has stopped
operating.
Solution
The charge in the battery could
be low or completely drained.
Try installing a new or
recharged battery.
Ensure that the battery is
inserted correctly (page 14).
Ensure that you are using the
correct type of battery. For best
results, use only a rechargeable
HP Photosmart R07 lithium ion
battery for HP Photosmart R-
series cameras (L1812A).
Ensure that the HP AC power
adapter is connected to the
camera and is plugged into a
working electrical outlet.
Ensure that the HP AC power
adapter is not damaged or
defective and is plugged into a
working electrical outlet.
Reset the camera (see
the Camera on page 112).
Resetting
119