HP Photosmart R507 User Manual page 127

Problem
My image is
too dark.
The wrong
date and/or
time is
shown.
Downloaded From camera-usermanual.com HP Manuals
Chapter 7: Troubleshooting and Support
Possible cause
There was not
enough light.
The flash was
on, but the
subject was too
far away.
A light is
behind the
subject.
The scene had
many light-
colored objects,
such as a white
dog in snow.
The date and/
or time was set
incorrectly or
the time zone
has changed.
Solution
Wait for natural lighting
conditions to improve.
Add indirect lighting.
Use the flash (see page 41).
Adjust the EV Compensation
(see page 51).
Use Adaptive Lighting
page 62).
Make sure your subject is within
the flash working distance. If so,
try using the Flash Off
(see page 41), which will require
a longer exposure (use a tripod).
Use the Flash On
page 41), or use
Lighting (see page 62) to
brighten the subject.
Increase the
(see page 51).
Use the Spot
Metering (see page 60).
Increase the EV Compensation
page 51).
Reset the date and time by using
the Date & Time
Setup Menu (see page 105).
(see
setting
setting (see
Adaptive
EV Compensation
setting for AE
(
option in the
see
127