HP Photosmart R507 User Manual page 37

If the
turn red, release the
your picture or video clip, and then press the
halfway down again. If the
blink green and the focus brackets continue to turn red after
several tries, there may not be enough contrast or light in the
focus region. Try using a technique called
focus on an object about the same distance away but in a
higher-contrast region, and then, without releasing the
Shutter
originally trying to photograph (see
page 38). You can also simply turn on more light, if that is
possible.
If the
turn red, and either the
Macro
following is true:
•
The camera is set to the
the focus is closer than the normal range. The camera will
not take a picture if it cannot find focus.
•
The camera is set to the
detects the focus is closer or farther away than the
range. In this case, the camera will not take a picture if it
cannot find focus.
•
The camera is set to the
focus range but detects the focus is farther away than the
Super Macro
a picture if it cannot find focus.
Downloaded From camera-usermanual.com HP Manuals
Chapter 2: Taking Pictures and Recording Video Clips
AF viewfinder light blinks green and the focus brackets
button, point the camera at the object you were
AF viewfinder light blinks green, the focus brackets
blinks in the
range. In this case, the camera will not take
Shutter button, re-frame the subject for
AF viewfinder light continues to
Macro icon or the
Live View screen, one of the
Normal Focus
Macro (close-up) focus range but
Super Macro
Shutter
Focus Lock
Using Focus Lock
Super
range but detects
(super close-up)
button
to
on
Macro
37