HP Photosmart R507 User Manual page 141

Message
Cannot Connect
To Product
(continued)
Downloaded From camera-usermanual.com HP Manuals
Chapter 7: Troubleshooting and Support
Possible cause
The camera is
set to the Digital
Camera setting
in the USB
Configuration
sub-menu of the
Setup Menu, but
the computer
cannot
recognize the
camera as a
digital camera.
The camera is
connected to the
computer
through a USB
hub, and your
USB hub is not
compatible with
the camera.
You are using
the HP
Photosmart R-
series dock and
forgot to press
the Save/Print
button.
Solution
Change the USB
Configuration setting to
Disk Drive in the
Menu. (See page 106.)
This allows the camera to
appear as another disk
drive on the computer so
that you can easily copy
the image files from the
camera to the computer
hard drive.
Connect the camera
directly to a USB port on
the computer.
Press the Save/Print
on the dock.
Setup
button
141