HP Photosmart R507 User Manual page 42

NOTE
If you change the flash setting, the camera will remain
in that setting until you change it or turn off the camera.
When you turn the camera on again, flash resets to the
default
button when you turn the camera back on will restore this
setting to what it was when you turned it off.
Setting Description
The camera measures light and uses the flash if
Auto Flash
necessary.
A
The camera measures light and uses the flash with
Red-Eye
red-eye reduction if necessary (see the following
A
NOTE for a description of red-eye reduction).
Flash On The camera always flashes. If the light is behind your
subject, you can use this setting to increase the light
on the front of your subject. This is called "fill-flash."
The camera will not flash, no matter the lighting
Flash Off
conditions.
The camera fires the flash if necessary (using red-eye
Night
reduction) to illuminate objects in the foreground. It
then continues to expose as if the flash had not fired to
gather the background (see the following NOTE for a
description of red-eye reduction).
Downloaded From camera-usermanual.com HP Manuals
42
Auto Flash setting. Holding down the
HP Photosmart R507/R607 User's Manual
Menu/OK