Table of Contents
Advertisement
8. Programmable Features
8.2.2 Time settings
Alarm
An alarm will sound for 3 minutes at the set time once or
daily. Set the date and time beforehand (page 17).
1. {j/OK} i "Handset Setup" i {>}
2. "Time Settings" i {>}
3. "Alarm" i {>} 2 times
4. Select an alarm mode. i {>}
"Off"
Turns alarm OFF. Press {>} again,
then press {ih} to finish.
"Once"
The alarm sounds once at the set time.
Enter the desired day and month.
"Daily"
An alarm sounds daily at the set time.
5. Enter the desired hour and minute. i {j/OK}
6. Select the desired ringtone. i {>}
7. "Save" i {>} i {ih}
Note:
L To stop the alarm, press any dial key.
L When in talk or intercom mode, the alarm will not
sound until the call has ended.
L If you select "Once", the setting will change to "Off"
after the alarm sounds.
8.2.3 Display setup
Display language
1. {j/OK} i "Handset Setup" i {>}
2. "Display Setup" i {>}
3. "Select Language" i {>}
4. Select the desired language. i {>} i {ih}
Note:
L If you select a language you cannot read, press
{ih}, press {j/OK}, press {^} 3 times, press
{>}, press {V} 2 times, press {>}, press {V}, press
{>}, select the desired language, press {>}, then
press {ih}.
8.2.4 Call options
Setting call restriction
You can restrict selected cordless handsets/base unit
from dialling certain numbers. You can assign up to 6
phone numbers to be restricted, and select which
cordless handsets/base unit will be restricted. Storing
area codes here will prevent the restricted cordless
handsets/base unit from dialling any phone number in
that area code.
1. {j/OK} i "Base Unit Setup" i {>}
2. "Call Options" i {>}
54
3. "Call Restrict" i {>}
4. Enter "0000" (default base unit PIN).
L If you forget your PIN, contact our service
personnel.
5. To restrict the base unit, press {0}.
To restrict a cordless handset, press the desired
cordless handset number.
L All the registered cordless handset numbers will
be displayed.
L Flashing numbers indicate call restriction is
turned ON for the corresponding cordless
handset/base unit.
L To turn call restriction OFF for a cordless
handset/base unit, press the number again. The
number will stop flashing.
6. {j/OK}
7. Select a memory location. i {>}
8. Enter the phone number or area code to be restricted
(up to 8 digits). i {j/OK} i {ih}
L To erase a restricted number, press {C/T}.
Advertisement
Table of Contents
