Table of Contents
Advertisement
8. Programmable Features
Feature
Receiving oversized
documents
Changing the LCD
*2
display contrast
Changing the fax
activation code
Setting the memory
reception alert
Setting friendly
reception
48
Feature code
Selection
If the size of the document sent by the other party is as large as
{#}{3}{6}
or larger than the recording paper, the unit can reduce the
document and print it. Select the desired reduction rate.
{1} "72%"
{2} "86%"
{3} "92%" (default)
{4} "100%"
Note:
L The information of the sending party is printed on the top of
each page. Therefore, even if the original document is the
same size as the recording paper, the document will be
divided into 2 sheets when printed at "100%". Select "92%" to
print on 1 sheet.
{1} "NORMAL" (default)
{#}{3}{9}
{2} "DARKER"
If you wish to use an extension telephone (page 33) to receive
{#}{4}{1}
faxes, activate this feature and program the activation code.
{0} "OFF"
{1} "ON" (default)
1. {MENU} i {#}{4}{1}
2. Press {1} to select "ON". i {SET}
3. Enter your code from 2 to 4 digits, using 0-9, {*} and {#}.
4. {SET} i {MENU}
To alert you with a beeping sound when a received fax document
{#}{4}{4}
is stored into memory due to some existing problem.
{0} "OFF": Deactivates this feature.
{1} "ON" (default): You will hear a beeping sound.
Note:
L The slow beeps will continue until you clear the printing
problem and make sure the unit is supplied with enough paper
to print the stored document.
To receive a fax automatically when you answer a call and hear a
{#}{4}{6}
fax calling tone (slow beep).
{0} "OFF": You have to press {FAX START} for fax reception.
{1} "ON" (default): You do not have to press {FAX START} for fax
reception.
Setting
Recording
paper size
"100%"
A4
"92%" (default)
A4
"86%"
A4
"72%"
A4
L The default code is "***9".
Original
document size
Letter
A4
A4
Legal
Advertisement
Table of Contents
