Table of Contents
Advertisement
Feature
Sending a fax at a
specified time
Setting the Caller ID list
to print automatically
Activating the
Distinctive Ring feature
Setting the quick scan
Feature code
Selection
This feature allows you to take advantage of low-cost calling
{#}{2}{5}
hours offered by your telephone company. This feature can be set
up to 24 hours in advance of the desired time.
{0} "OFF" (default)
{1} "ON"
To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to select the
desired resolution (page 29).
3. {MENU} i {#}{2}{5}
4. Press {1} to select "ON". i {SET}
5. Enter the fax number. i {SET}
6. Enter the transmission start time.
7. {SET} i {MENU}
Note:
L To cancel after programming, press {STOP} then {SET}.
{0} "OFF" (default): The Caller ID list will not be printed
{#}{2}{6}
automatically, but the base unit will keep a record of the
information for the last 50 callers.
{1} "ON": The Caller ID list will be printed automatically each time
the base unit logs 50 callers (page 23).
{0} "OFF" (default)
{#}{3}{1}
{1} "ON"
See page 37 for details.
This feature is helpful when you want to remove the document for
{#}{3}{4}
other uses, because the unit will release the document before
sending or copying.
{0} "OFF" (default): Deactivates this feature.
{1} "ON": The unit will scan the document and store it into
memory first, then the unit will start sending or copying the
documents.
Note:
L If the document exceeds the memory capacity, sending of the
whole document or copying of the exceeded document will be
cancelled and this feature will be turned OFF automatically.
L If you select 12-hour time entry (page 17), press {*}
repeatedly to select AM or PM.
L If you select 24-hour time entry (page 17), the time is set
using 24-hour time entry.
8. Programmable Features
47
Advertisement
Table of Contents
