Receive To Memory; Printing Out Documents - Panasonic DX-800 Network Fax Manual

Printing Out Documents

After receiving a document with the Receive To Memory feature, the following message will appear on the
display.
MESSAGE IN MEMORY
< RCV TO MEMORY >
To print the document, follow the steps below.
1
2
5
3
3
4
5
Enter the password to print the documents.
(See Note 1)
Ex:
1 2 3 4
6
Machine will start to print the documents.
1. If the password has not been set, your machine will not prompt you to enter the password.
NOTE
2. The documents will be printed immediately after pressing
3. Once the RCV TO MEMORY feature is set to "On", the password cannot be changed (Fax
Parameter No. 37 will not be shown on the LCD display). If you wish to change the password,
set RCV TO MEMORY feature to "Off" first. Then change the password. (See page 170)
8

Receive To Memory

SELECT MODE
∨ ∧
ENTER NO. OR
RCV TO MEMORY=ON
1:OFF 2:ON 3:PRINT
RCV TO MEMORY=PRINT
1:OFF 2:ON 3:PRINT
INPUT PASSWORD
INPUT PASSWORD
* PRINTING *
MEMORY RCV'D DOC
in Step 4.
SET
(1-9)
1234
171