Panasonic DX-800 Network Fax Manual page 227

Information Codes
Info.
Code
412 No data from the transmitting side.
414 Polling password does not match.
415 Polling transmission error.
416/417 Received data has too many errors.
418/419
420/421 Machine goes to receiving mode, but receives no
command from the transmitting side.
422/427 Interface is incompatible.
430/434 Communication error occurred while receiving.
436/490 Received data has too many errors.
456 • Unit received a confidential document or was
requested to be polled of a confidential document
under any of following conditions:
1. Not enough space in memory to receive the
confidential document.
2. Confidential Mailbox is full.
3. While printing received document.
• Unit was requested to relay a document.
492/493/ Communication error occurred while receiving.
494
495 Telephone line disconnected.
501/502 Communication error occurred using the internal V.34
Modem.
540/541/ Communication error occurred while transmitting.
542/543/
544
550 Telephone line disconnected.
552/553/ Communication error occurred while receiving.
554/555
580 Sub-address transmission to a unit that has no Sub-
address function.
581 Sub-address Password transmission to a unit that has
no Password Sub-address function.
601 ADF Door was opened during ADF transmission.
623 No document loaded on the ADF.
630 Redial was not successful due to a busy line.
631 During dialing, STOP was pressed.
634 Redial was not successful due to no response from
the called station or wrong number dialed.
Note: If busy tone was not detected, the machine will
only redial once.
638 Power failure occurred during the communication.
711 Incorrect LDAP settings.
712 Incorrect email address.
714 Cannot Log on to the LAN.
715 TCP/IP connection timed out.
Continued on the next page...
Meaning
Troubleshooting
Action
Check with the other party.
Check the polling password.
Check the polling password.
Check with the other party.
1. Remote side misdial.
2. Check with the other party.
Check with the other party.
Check with the other party.
Check with the other party.
1. Print a File List and check the contents.
2. Wait until unit finishes printing.
Check with the other party.
Check with the other party.
Check with the other party.
1. Reload the document and send again.
2. Check with the other party.
Check with the other party.
Check with the other party.
Check the remote station.
Check the remote station.
Close the ADF Door and send again.
Reload the document and send again.
Reload the document and send again.
Reload the document and send again.
Check the telephone number and send again.
Check the power cord and plug.
Check the LDAP Server Name, LDAP Log in
Name, LDAP Password, LDAP Search Base.
Check the registered email address.
Check the IP Address of the SMTP Server
with the Network Administrator.
Check the 10Base-T/100Base-TX
connection. An unexpected LAN problem
occurred. Contact the Network Administrator.
Check the Internet Fax Parameter settings.
Verify the IP Address, Default Gateway IP
Address, SMTP Server IP Address.
Page
--
139
139
--
--
--
--
--
160
--
--
--
--
--
--
207
207
232
--
--
--
--
40
--
cable --
--
227