Setup As Pop3 Client - Panasonic DX-800 Network Fax Manual

Pre Installation Information

Setup as POP3 Client

To install your machine as POP3 Client, the following network parameters need to be programmed on your
network.
• IP Address of the DNS Server (if not available, see Note 2)
• IP Address of your machine
• Subnet Mask of your machine
• Name or IP Address of the Default SMTP mail server
• IP Address of the Default Gateway
• POP Server Name or IP Address
• POP User Account Name
• POP Password
• Email Address of your machine (see Note 1)
Email Transmission (from your machine to a PC)
Email reception (from a PC to your machine)
NOTE
18
ifaxuser@fax01.panasonic.com
Router(Gateway)
popuser001@panasonic.com
ifaxuser@panasonic.com
Router(Gateway)
popuser001@panasonic.com
1. The email address format can be the same as your regular email address. If your email
address is popuser001@panasonic.com, your machine's email address can be
Internet_Fax@panasonic.com.
2. By default the machine requires the IP Address of the DNS Server and prompts you to enter
the SMTP and POP Server Names. If the DNS Server is not available, change the Fax
Parameter No. 161 (DNS SERVER) to "1:Invalid". Then the machine will prompt you to enter
the IP Address of the SMTP and POP Servers.
SMTP01.panasonic.com
(SMTP Mail Server)
SMTP POP02.panasonic.com
POP3 (POP Server)
SMTP01.panasonic.com
(SMTP Mail Server)
SMTP
POP02.panasonic.com
POP3 (POP Server)