Receive To Memory; General Description; Setting The Rcv To Memory Password; Setting Rcv To Memory - Panasonic DX-800 Network Fax Manual

Receive To Memory

General Description

This feature is used to secure all received documents by storing them into the memory. To print out the
document from memory, the authorized operator must enter the correct password.

Setting the RCV To Memory Password

1
2
3
4
5

Setting RCV To Memory

1
2
3
4
NOTE
170
7
4
3 7
Enter a 4-digit RCV to Memory Password.
Ex:
1 2 3 4
8
5
2
1. When the memory overflows, the machine will stop receiving and release the line. The
machine will not answer the next incoming call until there is space available in the memory.
2. We recommend that optional flash memory card is installed when this function is used. See
page 239 on Image Memory Capacity.
SET MODE (1-8)
∨ ∧
ENTER NO. OR
FAX PARAMETER(1-182)
NO.=
37 RCV TO MEMORY
37 RCV TO MEMORY
1234
SELECT MODE (1-9)
∨ ∧
ENTER NO. OR
RCV TO MEMORY=OFF
1:OFF 2:ON 3:PRINT
RCV TO MEMORY=ON
1:OFF 2:ON 3:PRINT
MMM-dd-yyyy 15:00
< RCV TO MEMORY >