Programmable Keys' Paster Using Instruction - ATCOM A40 Quick Start Manual

A40/A41(W)Quick Start Guide

1.3 Programmable keys' paster using instruction

Step1. Use needle or some other tools to insert into the hole of the plastic sheet,
hog the plastic sheet.
Step2. Lift out the plastic sheet
Step3. Take off the plastic sheet
Step4. Use needle or some other tools to insert into the edge of the paster, hog
and lift out the paster
Step5. Write down the identification of each programmable key on the paster
after taking off the paster
Step6. Put back the paster
Step7. Insert the plastic sheet into the slot
Step8. Push the other side of the plastic sheet into the other slot
ATCOM TECHNOLOGY CO., LIMITED