Setup Troubleshooting; Symptoms And Actions; If Your Problem Cannot Be Resolved - Contec AD12-8(PM) User Manual

2. Setup

Setup Troubleshooting

Symptoms and Actions

Unable to initialize the PC card [Windows NT 4.0]
Use the NT diagnostic program and check whether the same IRQ is used by another device.
Input and output do not work!
The I/O address on the PC card may not be recognized by the system and may be used by another
device. On Windows XP, 2000, Me, 98, or 95, try using Device Manager to set the I/O address
manually. As Windows NT uses API-AIO(98/PC), use the PC card configuration utility to set the I/O
address manually.
The diagnostic program works correctly but the application program does not.
The diagnostic program uses the API-TOOL functions. If the diagnostic program works correctly,
other applications should work correctly also. If you have a problem, recheck your program taking
note of the following points.
- Check the return values of the API functions.
Operating system does not boot correctly [Windows NT]
Remove the PC card and reboot the PC, use "Control Panel" - "Devices" to set the PCMCIA driver to
"Auto" startup, then try again.

If your problem cannot be resolved

Contact your retailer.
37
AD12-8(PM)