Setup; Setup Procedure - Contec CONPROSYS nano CPSN-MCB271-S1-041 Reference Manual

Remote i/o cpu unit

Table of Contents

2. Setup

Follow the steps below to set up.

STEP1

Installation procedure

Proceed accordingly with the instruction to set up the product correctly.

STEP2

Cable connection

STEP3

Turning on the power.

Reconfirm that you have correctly followed steps 1and 2. Then, turn on the power.

If you find any errors or abnormalities after turning on the power, turn it off immediately

and check whether the setup has been properly conducted.

CPSN-MCB271-S1-041 Reference Manual (Hardware)

2 Setup

Table of Contents