Extron electronics SW HDMI Series User Manual page 39

Hide thumbs Also See for SW HDMI Series:

Table of Contents

Install the shelf in the rack.

1U Universal Rack Shelf

Front false

faceplate

uses 2

screws.

Use 2 mounting holes on

opposite corners.

Figure 23.

Mounting an SW HDMI Switcher on a Standard 9.5-inch Deep Rack

Shelf

Back of the rack mounting

The SW HDMI can also be mounted vertically to the front or rear rack supports, using the

optional MBB 100 Back of the Rack Mounting Kit as follows:

If rubber feet were previously attached to the bottom of the unit, remove them.

Remove the two screws from each side of the switcher. Retain the screws for

possible later reassembly.

Attach the brackets to the sides of the unit, using the longer screws included in the

mounting kit (see figure 24).

Figure 24.

Attaching the Back of the Rack Mounting Brackets to an

SW HDMI Switcher

1/2 Rack Width Front False

Faceplate

(2) 4-40 x 3/16"

Screws

SW HDMI Series • Reference Information

Table of Contents