Extron electronics SW HDMI Series User Manual page 31

Command
EDID Minder (continued)
Save display EDID to user
location
View EDID native resolution
Example
HDCP Authentication
Enable or disable HDCP
authentication per input
Enable or disable HDCP
authentication for all inputs
View HDCP authentication
status
Front Panel Lockout
Enable or disable lock mode
View lockout status
Front Panel IR Receiver Enable and Disable
Enable and disable IR receiver
View IR status
Unit Name
Set unit name
Set name to factory default
View unit name
Information Requests
Request information
Example:
Request part number
ASCII Command Response
(Host to Switcher) (Unit to Switcher)
E X$ }
S EDID Edid S
E } X^ ]
N EDID
E }
N EDID 1600x1200 @ 60 Hz
E X! X@ }
E * HDCP
Hdcp E
E X@ }
E HDCP Hdcp E
E }
E HDCP Hdcp E
X*
X Exe
X*]
X
X1!
* 65# IRDisable
65# X1! ]
E X1# }
CN Ipn •
E }
• CN Ipn • SW-HDMI-SERIES
E } X1# ]
CN
X!
I
V
I
V4 • F2 • Vmt0 • Amt0
N
60-nnn-nn
SW HDMI Series • Remote Communication and Control
Additional Description
X$ ] Store the EDID of the connected display
as user-assigned EDID file
X$
= 50 through 53.
Show native resolution and refresh rate
X^
from current EDID selection.
]
X! X@ ]
* Set HDCP authentication for input
X@ X@
. For :
0 = Disable HDCP authentication
1 = Enable HDCP authentication (default)
X@ ]
Set HDCP authentication to
inputs.
X@ X@ ]
View the current HDCP authentication
•...
setting.
X* ]
Select front panel lock mode
1 = locked, 0 = unlocked (default)
Show executive mode On or Off status.
X1! ] Disable the IR remote receiver on the
front panel from receiving signals from
the IR remote control.
View IR receiver status
0 = IR Disable feature is off (IR enabled)
(default).
1 = IR Disable feature is on (IR disabled).
X1# ]
Assign name
can consist of up to 24 alphanumeric
characters, including the hyphen (-).
]
Show the current switcher name (
X1@ X@ X@ ]
• F • Vmt • Amt
Show the selected video inputs, switch
mode, video muting status, and audio
muting status (audio models only).
X!
= input number: 1 through highest
number of inputs available.
X@
= video or audio mute status. For
1 = muted, 0 = unmuted
X1@
= Switch mode. For
1 = normal, 2 = auto-input mode
]
] Show the part number of the switcher
(see Included Parts
model part numbers).
X$
.
X!
to
X@
for all
X* X*
. For :
X1! X1!
. For :
X1# X1#
for the switcher.
X1#
).
X@
:
X1@
:
on page 32 for
25