Extron electronics SW HDMI Series User Manual page 37

12.
If you want to remove a device from the Devices section, do the following:
a. Click on the names of the devices to be deleted, to highlight them.
b. Select
Remove Selected Device(s)
c. On the Remove Device(s) window, select or deselect any devices on the list as
desired, then click
To remove all devices, select
13. Click Begin. The following indicators show the progress of the update:
The Transfer Time section shows the amounts of remaining and elapsed time for
•
the update.
The Total Progress section displays a progress bar with
•
In the Devices section, the Progress column displays an incrementing percentage
•
and another progress bar. The Status column displays
Figure 21. Firmware Upload in Progress
14. The upload is complete when the
Progress column shows
and in the field. Close the Firmware Loader window.
Status
Figure 22. Firmware Upload Complete
from the
.
Remove
Remove All Devices
Remaining Time
, and is displayed above the progress bar
100% Completed
SW HDMI Series • Remote Communication and Control
menu.
Edit
from the menu.
Edit
above it.
Uploading...
.
Uploading
field shows , the
00.00.00
31