Starting The Programme; Open The Door - AEG L 98699 FL User Manual

20 www.aeg.com
5. Measure out the detergent and the
fabric conditioner.
6. Carefully close the detergent dis-
penser. Make sure that the flap
does not cause a blockage when
you close the drawer.
9.4 Set the delay start
1.
Touch button
set the desired delayed start. The
display shows the expected end of
the programme
2.
Touch button
starts the countdown of the delay
start.
When the countdown is completed,
the programme starts automatically.
Before you touch button
start the appliance, you can can-
cel or change the set of the delay
start.
You cannot set the delay start
with the Steam programme.

9.5 Starting the programme

1.
Touch button
gramme. The indicator of button
stops to flash and is on with red col-
our.
If a delayed start is set, the appliance
starts the countdown.
The appliance adjust auto-
matically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximate-
ly 15 minutes from the start of
the programme, the display
shows the new time value.
9.6 Interrupt a programme
1.
Touch button
flashes.
2.
Touch button
ing programme continues.
again and again to
7
6 , the appliance
6 to
6 to start the pro-
6
6 . The indicator
6 again. The wash-
9.7 Cancel a programme
1.
Press button
1
gramme and to deactivate the appli-
ance.
2.
Press button 1
the appliance. Now, you can set a
new washing programme.
The appliance does not drain the
water.
9.8 Change a function
You can change only some functions be-
fore they operate.
1.
Touch button
6
flashes.
2. Change the function set.
3.
Touch button 6
ing programme continues.

9.9 Open the door

While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1.
Touch button 6
symbol in the display goes off and a
message tells you that the door is
unlocked.
2. Open the appliance door.
3. Close the appliance door and touch
button again. The programme or
6
the delay start continues.
If the temperature and the level
of the water is too high, the door
lock symbol stays on. You cannot
open the door. If necessary, do
the following procedure to open
the door:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is in
the drum.
to cancel the pro-
again to activate
. The indicator
again. The wash-
. The door lock