Extra Rinse Button; Permanent Extra Rinse - AEG L 98699 FL User Manual

Hide thumbs Also See for L 98699 FL:
Table of Contents

Advertisement

5.10 EXTRA RINSE BUTTON

9
Touch button
to add rinsing phases
9
to a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
5.11 STAINS, PREWASH AND
SOAK BUTTON
Touch button
to set one of the these
10
functions:
5.12 STAINS
Use this function for laundry with hard
stains to remove.
When you set this function, put the stain
remover into compartment
The programme duration increa-
ses.
This function is not available with
a temperature lower than 40° C.
5.13 PREWASH
Use this function for heavy soil.
The appliance adds a prewash phase to
the main wash.
The programme duration increases.
5.14 SOAK
Use this function for heavy soil.
The appliance soaks the laundry at 30°C
for about half an hour before to wash.
5.15 SPIN BUTTON
Touch button
11
to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase (' No Spin '
function).
• Activate the ' Rinse Hold ' function.
Set this function to prevent fabric
creases. The appliance does not drain
10
.
11
the water when the programme is
completed.
5.16 TEMPERATURE BUTTON
12
Touch button
to change the default
12
temperature.
Symbols - - - and
5.17 Acoustic signals function
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You touch the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, touch button
10
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you touch the buttons and
when a malfunction occurs.
5.18 Child lock function
This function prevents children to play
with the control panel.
• To activate the function, touch button
and button
12
11
until the display shows the symbol
• To deactivate the function, touch but-
ton
12
and button
time until the symbol
You can activate the function:
• Before you touch the button
appliance cannot start.
• After you touch the button
buttons and the programme knob are
deactivated.

5.19 Permanent extra rinse

function
With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function touch button
and button
8
7
until the display shows the symbol
ENGLISH
11
= cold water
and button
9
at
at the same time
11
at the same
goes off.
6
: the
, all the
6
at the same time
.
.

Advertisement

Table of Contents
loading

Table of Contents