1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L 98499 FL
  6. User manual

AEG L 98499 FL User Manual

Aeg washer user manual
Hide thumbs Also See for L 98499 FL:
Table of Contents

Advertisement

Quick Links

L 98499 FL
WASHING MACHINE
USER MANUAL
L 98699 FL

Advertisement

Table of Contents
loading

Related Manuals for AEG L 98499 FL

Summary of Contents for AEG L 98499 FL

  • Page 1 L 98499 FL WASHING MACHINE USER MANUAL L 98699 FL...

  • Page 2: Table Of Contents

    CONTENTS 4 SAFETY INFORMATION 6 ENVIRONMENT CONCERNS 6 TECHNICAL INFORMATION 7 PRODUCT DESCRIPTION 7 INTERIOR ACCESSORIES 8 CONTROL PANEL 9 ENVIRONMENT CONCERNS 14 WASHING PROGRAMMES 18 BEFORE FIRST USE 18 USING THE APPLIANCE 19 ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME 19 LOADING THE LAUNDRY 20 USING THE DETERGENT AND ADDITIVES...
  • Page 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 4: Safety Information

    SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property • To help the environment • For the correct operation of the ap- pliance. Always keep these instructions with the appliance also if you move or give it to a different person.

  • Page 5: Electrical Connection

    WARNING! Do not look directly into the beam of the lamp. To replace the internal lamp, contact the service centre. Disconnect the mains plug from the mains socket before the re- placement of the internal lamp. INSTALLATION • The appliance is heavy, be careful when you move it.

  • Page 6: Environment Concerns

    600 / 850 / 600 mm 640 mm 230 V 2200 W 10 A 50 Hz IPX4 0,5 bar (0,05 MPa) 8 bar (0,8 MPa) Cold water 9 kg 1400 rpm (L 98499 FL) 1600 rpm (L 98699 FL)

  • Page 7: Product Description

    PRODUCT DESCRIPTION Worktop Detergent dispenser Control panel Door handle Internal lamp Rating plate Drain pump INTERIOR ACCESSORIES ENGLISH Feet for the appliance level Water drain hose Water inlet hose Mains cable Transit bolts Feet for the appliance level Spanner To remove the transit bolts. Plastic caps To close the holes on the rear side of the cabinet after the removal of...

  • Page 8: Control Panel

    CONTROL PANEL Glätten Auffrischen Energiesparen Super Eco 20Min. - 3kg Outdoor Spülen Schleudern/ Pumpen Auto Off Auto Off button Programme knob Display Dampf touch button Memory touch buttons Start/Pause touch button Zeitvorwahl touch button Gewichtssensor Koch/Bunt Extra Leise Pflegeleicht Leichtbügeln Feinwäsche Wolle/Seide Daunen...

  • Page 9: Environment Concerns

    ENVIRONMENT CONCERNS PACKAGING MATERIALS Recycle the materials with the symbol Put the packaging in applicable con- tainers to recycle it. ECOLOGICAL HINTS To help the environment, use less water and energy, obey these instructions: • Set a programme without the pre- wash phase to wash laundry with nor- mal soil.
  • Page 10 DISPLAY The text bar: • Guides you in the use of the appliance. • Shows the programme status and phase. • Shows alarm messages. Refer to 'Troubleshooting' . The symbols appear on the display when the related phase or function is set. •...
  • Page 11 • The time of delay – When you set the delayed start the time of the programme end in- creases by steps of 30 minutes till 10 hours and by steps of one hour till 20 hours. • The end of the programme The display shows a zero.
  • Page 12 1) Only available for Spin/Drain programme. The default temperature of the programme. DAMPF BUTTON Touch button This is possible only with programmes where the steam function is available. The duration of the steam phase changes accordingly to your selection. MEMORY BUTTONS Touch one of the buttons rise a programme or to set a memo- rised programme.

  • Page 13: Permanent Extra Rinse

    VORWÄSCHE Use this function for heavy soil. The appliance adds a prewash phase to the main wash. The programme duration increases. EINWEICHEN Use this function for heavy soil. The appliance soaks the laundry at 30°C for about half an hour before to wash.

  • Page 14: Washing Programmes

    WASHING PROGRAMMES Programme Koch/Bunt Extra Leise Pflegeleicht Leichtbügeln Temperature Type of load Weight of load 95° - Cold White and col- oured cotton with heavy level of soil. Maximum load 9 95° - Cold White and col- oured cotton with normal level of soil.
  • Page 15 Programme Temperature Feinwäsche 40° - Cold Rinses Short spin Wolle / Seide 40° - Cold Rinses Short spin Daunen 60° - 30° Rinses Short spin Anti-Allergie 60° Schleudern / 0° Pumpen Type of load Programme Weight of load description Delicate fabrics Wash as acrylics, vis- Rinses...
  • Page 16 Programme Spülen Outdoor 20 min. - 3 kg Super Eco Energiespa- 1) Not available with temperature lower than 40°C. 2) If you use liquid detergent, set a programme without PREWASH. 3) If you touch the button the quantity of the load. It is possible to keep the full load but the washing results are not good.

  • Page 17: Consumption Values

    7) Press button to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin. 8) Use a special detergent for very low temperature. 9) Set this programme to have a good washing results and decrease the energy consumption. The time of the washing programme is extended.

  • Page 18: Before First Use

    Standard programmes for the Energy Label consumption values The cotton 60 °C economy and cotton 40 °C economy are the standard cotton programmes for normally soiled cotton laundry. They are suitable to clean nor- mally soiled cotton laundry and they BEFORE FIRST USE 1.

  • Page 19: Activating The Appliance And Setting Aprogramme

    ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME For a correct operation of the weight sensor, activate the appliance and set the programme BEFORE you put the laundry in the drum. 1. Press button pliance. 2. Turn the programme knob ( the necessary programme or touch one of the buttons memorised programme.

  • Page 20: Using The Detergent And Additives

    USING THE DETERGENT AND ADDITIVES Always obey the instructions that you find on the packaging of the deter- gent products. The detergent compartment for the prewash phase and the soak programme. Add the detergent for prewash and soak before the start of the programme.

  • Page 21: Check The Position Of The Flap

    Check the position of the flap 5. Measure out the detergent and the fabric conditioner. 6. Carefully close the detergent dis- penser. Make sure that the flap does not cause a blockage when you close the drawer. 1. Pull out the detergent dispenser until it stops.

  • Page 22: Starting A Programme

    SET THE DELAY START 1. Touch button to set the desired delayed start. The display shows the expected end of the programme 2. Touch button starts the countdown of the delay start. When the countdown is comple- ted, the programme starts auto- matically.

  • Page 23: At The End Of Programme

    If you deactivate the appliance, it is necessary to set the pro- gramme again. AT THE END OF PROGRAMME 1. The appliance stops automatically. 2. The acoustic signals operate, if it is active. 3. In the display message tells you that the pro- gramme is completed.

  • Page 24: Helpful Hints And Tips

    HELPFUL HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, col- oured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. •...
  • Page 25 Water hardness table Level Type soft medium hard very hard Water hardness °dH °T.H. 0-15 8-14 16-25 15-21 26-37 > 21 > 37 ENGLISH mmol/l Clarke 0-1.5 1.6-2.5 10-16 2.6-3.7 17-25 >3.7 >25...

  • Page 26: Care And Cleaning

    CARE AND CLEANING WARNING! Disconnect the appliance from the mains supply before you clean it. DESCALING The water we use contains limescale. If it becomes necessary, use a water soft- ener to remove limescales. Use a special product made for wash- ing machines.

  • Page 27: Detergent Dispenser

    DETERGENT DISPENSER To clean the dispenser: DRAIN PUMP Regularly examine the drain pump and make sure that it is clean. Clean the pump if: • The appliance does not drain the wa- ter. • The drum cannot turn. • The appliance makes an unusual noise because of the blockage of the drain pump.

  • Page 28: To Clean The Drain Pump

    To clean the drain pump: 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess of 4. Press the two levers and pull for- 5. When the container is full of water, 6.

  • Page 29: Emergency Drain

    THE INLET HOSE FILTER AND THE VALVE FILTER It could be necessary to clean the filters when: • The appliance does not fill with wa- ter. • The appliance fills with the water for a long time. To clean the water inlet filters: 45°...

  • Page 30: Frost Precautions

    When you drain the water with the emergency drain procedure, you must activate again the drain system: 1. Put 2 litres of water in the main wash compartment of the deter- gent dispenser. 2. Start the programme to drain the water.

  • Page 31: Troubleshooting

    TROUBLESHOOTING The start of the appliance does not oc- cur or it stops during operation. Try to find a solution to the problem before you contact the service centre (refer to the table). With some problems, the acoustic signals operate and the display shows an alarm message.
  • Page 32 PROBLEM WITHOUT ALARM MESSAGE Problem The appliance does not drain the water. The spin phase does not operate. The programme does not start. There is water on the floor. You cannot open the appliance door. The appliance makes an unusual noise.
  • Page 33 Problem Possible cause You did not remove the packaging and/or the transit bolts. The load is very small. The appliance fills The end of the drain with water and hose is too low. drain immediate- The washing re- The detergent you used sults are not satis- was not sufficient or cor- factory.

  • Page 34: Installation

    INSTALLATION UNPACKING 1. Use the gloves. Remove the exter- nal film. If necessary, use a cutter. 2. Remove the cardboard top. 3. Remove the polystyrene packaging materials. 4. Remove the internal film. 5. Open the door. Remove the poly- styrene piece from the door seal and all the items from the drum.
  • Page 35 6. Put the polystyrene front piece on 7. Remove the polystyrene protection 8. Fully clean and dry the bottom of 9. Make sure to identify the different ENGLISH the floor behind the appliance. Carefully put down the appliance with the rear side on it. Make sure not to damage the hoses.
  • Page 36 10. – Remove the adhesive strip from the silent barriers. – Attach the four barriers to bot- tom of the appliance. Refer to the illustration. – Make sure that the barriers are securely attached. Attach the sound barriers at a room temperature.

  • Page 37: Positioning And Levelling

    WARNING! Remove all the packaging and the transit bolts before you in- stall the appliance. POSITIONING AND LEVELLING CAUTION! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the lev- 14. Replace the plastic spacers with the plastic caps.

  • Page 38: Water Drainage

    THE INLET HOSE Do not use an extension hose if the inlet hose is too short. Con- tact the service centre for the re- placement of the inlet hose. Water-stop device WATER DRAINAGE There are different procedures to con- nect the drain hose: •...
  • Page 39 With the plastic hose guide. Without the plastic hose guide. • On the edge of a sink. • Make sure that the plastic guide can- not move when the appliance drains. Attach the guide to the water tap or the wall. •...
  • Page 40 You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension.
  • Page 41 ENGLISH...
  • Page 43 ENGLISH...
  • Page 44 132940573-A-232011...

This manual is also suitable for:

L 98699 fl

Table of Contents