AEG L 98699 FL User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. L 98699 FL
  6. User manual
AEG L 98699 FL User Manual

AEG L 98699 FL User Manual

Hide thumbs Also See for L 98699 FL:
Table of Contents

Advertisement

Quick Links

L 98699 FL
WASHING MACHINE
USER MANUAL
L 98499 FL

Advertisement

Table of Contents
loading

Related Manuals for AEG L 98699 FL

Summary of Contents for AEG L 98699 FL

  • Page 1 L 98699 FL WASHING MACHINE USER MANUAL L 98499 FL...

  • Page 2: Table Of Contents

    CONTENTS 4 SAFETY INFORMATION 5 ENVIRONMENT CONCERNS 6 PRODUCT DESCRIPTION 7 ACCESSORIES 7 CONTROL PANEL 12 WASHING PROGRAMMES 17 BEFORE FIRST USE 18 USING THE APPLIANCE 18 ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME 18 LOADING THE LAUNDRY 19 USING THE DETERGENT AND ADDITIVES 20 STARTING A PROGRAMME 21 AT THE END OF PROGRAMME 22 HELPFUL HINTS AND TIPS...
  • Page 3 ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.

  • Page 4: Safety Information

    SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property • To help the environment • For the correct operation of the ap- pliance. Always keep these instructions with the appliance also if you move or give it to GENERAL SAFETY a different person.

  • Page 5: Environment Concerns

    ENGLISH To replace the internal lamp, time. Let the water flow for some mi- contact the service centre. nutes, then connect the inlet hose. Disconnect the mains plug from • The first time you use the appliance, the mains socket before the re- make sure that the water hoses and placement of the internal lamp.

  • Page 6: Product Description

    equipment. By ensuring this product is detailed information about recycling of disposed of correctly, you will help this product, please contact your local prevent potential negative council, your household waste disposal consequences for the environment and service or the shop where you human health, which could otherwise purchased the product.

  • Page 7: Accessories

    ENGLISH ACCESSORIES Spanner To remove the transit bolts. Plastic caps To close the hoses on the rear side of the cabinet, when you remove the transit bolts. Sound barrier To install on the bottom of the ap- pliance to decrease the noise of the spin phase.
  • Page 8 TOUCH SCREEN • The washing programme is comple- ted since five minutes. Do not wear gloves when you • You do not use the appliance for five touch the buttons. minutes. Make sure the touch screen and buttons are always clean and dry.
  • Page 9 ENGLISH • The time of the day When you activate the appliance the display shows the time of the day for some seconds. To adjust the clock, refer to "Clock setting". • The programme duration When the washing programme starts, the programme time decreases every minute.
  • Page 10 Extra rinsing The indicator bar fills accordingly the numbers of rinses. Stains Prewash Soak The indicator bar fills accordingly when you set the func- tions. The default spin speed of the programme. _ _ _ No spin Rinse hold The default temperature of the programme. Cold wash 2.
  • Page 11 ENGLISH – The display shows you the extra re- • Decrease the maximum speed of the duced programme duration. spin phase when you set a pro- gramme. Touch the button three time to set the programme normal duration again. The display shows only the spin speeds available with the set EXTRA SPÜLEN BUTTON programme.

  • Page 12: Washing Programmes

    ACOUSTIC SIGNALS FUNCTION • To deactivate the function, touch button and button at the You can hear the acoustic signals when: same time until the symbol goes • You activate the appliance. off. • You deactivate the appliance. You can activate the function: •...
  • Page 13 ENGLISH Programme Temperature Type of load Functions Weight of load Extra Leise 95° - Cold White and col- Wash SPÜLSTOPP oured cotton Rinses FLECKEN with normal level Long spin VORWÄ- of soil. Stop with wa- SCHE Maximum load 9 ter in the EINWEICHEN drum EXTRA SPÜ-...
  • Page 14 Programme Temperature Type of load Functions Weight of load Feinwäsche 40° - Cold Delicate fabrics Wash SPIN REDUC- Rinses as acrylics, vis- Rinses TION Short spin cose, polyester Short spin SPÜLSTOPP items with nor- OHNE mal soil. SCHLEU- Maximum load 4 DERN VORWÄ- SCHE...
  • Page 15 ENGLISH Programme Temperature Type of load Functions Weight of load Schleudern / 0° All fabrics. Drainage of SPIN REDUC- The maximum the water TION Pumpen load of the laun- Spin phase at OHNE dry is related to the maximum SCHLEU- the type of laun- speed DERN...
  • Page 16 Programme Temperature Type of load Functions Weight of load Energiespa- 60° or 40° White and fast Wash SPIN REDUC- coloured cotton Rinses TION with the normal Short spin SPÜLSTOPP OHNE soil SCHLEU- Maximum load 9 DERN FLECKEN VORWÄ- SCHE EINWEICHEN EXTRA SPÜ- ZEIT SPA- 1) Not available with temperature lower than 40°C.

  • Page 17: Before First Use

    ENGLISH 1) If you set a Steam programme with dried laundry, at the end of the cycle the laundry feel humid. It is better to expose clothes to the open air for about 10 minutes to let the humidity go away. Laundry should be removed from the drum as quick as possible. After a steam cycle, clothes may to be ironed anyway, but with less effort! 2) For the programme time, refer to the display.

  • Page 18: Using The Appliance

    USING THE APPLIANCE ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME 1. Press the button to activate the touch the button and the button appliance. to change the water tempera- ture and the spin speed. 2. Turn the programme knob ( ) to the necessary programme or touch 5.

  • Page 19: Using The Detergent And Additives

    ENGLISH USING THE DETERGENT AND ADDITIVES The detergent compartment for the prewash phase and the soak programme. Add the detergent for prewash and soak before the start of the programme. The detergent compartment for the washing phase. If you use a liquid detergent, put it immediately before you start the programme.

  • Page 20: Starting A Programme

    2. To use powder detergent, turn the flap up. 3. To use liquid detergent, turn the flap down. With the flap in the position DOWN: – Do not use gelatinous or thick liquid detergents. – Do not put more liquid deter- gent than the limit showed in the flap.

  • Page 21: At The End Of Programme

    ENGLISH INTERRUPT A PROGRAMME To open the appliance door: 1. Touch the button . The door 1. Touch the button . The indicator lock symbol in the display goes off flashes. and a message tells you that the 2. Touch the button again.

  • Page 22: Helpful Hints And Tips

    2. Set the drain or spin programme. If 4. When the programme is completed necessary, decrease the spin speed. and the door lock symbol goes off, you can open the door 3. Touch the button to start the 5. Press the button programme.

  • Page 23: Care And Cleaning

    ENGLISH Water hardness table Water hardness Level Type °dH °T.H. mmol/l Clarke soft 0-15 0-1.5 medium 8-14 16-25 1.6-2.5 10-16 hard 15-21 26-37 2.6-3.7 17-25 very hard > 21 > 37 >3.7 >25 CARE AND CLEANING WARNING! CAUTION! Do not use alcohol, solvents or chemical products.
  • Page 24 DETERGENT DISPENSER To clean the dispenser: 1. Press the lever. 2. pull the dispenser out firmly. 3. Remove the top part of the liquid additive compartment. 4. Clean all the parts with water. 5. Clean the dispenser recess with a brush.
  • Page 25 ENGLISH To clean the drain pump: 1. Open the drain pump door. 2. Pull the flap out to remove it. 3. Put a container below the recess of the drain pump to collect the water that flows out. 4. Press the two levers and pull for- ward the drainage duct to let the water flow out.
  • Page 26 9. Clean the filter under the water tap and put it back in the pump into the special guides. 10. Make sure that you tighten correctly the filter to prevent leakages. 11. Put the flap back and close the drain pump door. THE INLET HOSE FILTER AND THE •...

  • Page 27: Trouble Shooter And Service

    ENGLISH When you drain the water with the 2. Close the water tap. emergency drain procedure, you must 3. Remove the water inlet hose activate again the drain system: 4. Put the two ends of the inlet hose in 1. Put 2 litre of water in the main wash a container and let the water flow compartment of the detergent dis- out of the hose.
  • Page 28 Problem Possible cause Possible solution The display tells The water drain hose is Make sure that the water drain to check the damaged. hose has no damages. drain filter: the appliance does not drain the wa- ter. The filter of the drain Clean the filter of the drain pump is blocked.
  • Page 29 ENGLISH Problem Possible cause Possible solution The Child Lock function Deactivate the Child Lock func- is activated. tion. There is water on Leakages from the cou- Make sure that the couplings are the floor. plings of the water ho- tight. ses.

  • Page 30: Technical Data

    Problem Possible cause Possible solution After a steam A wrong STEAM pro- Note the composition of the fab- programme, gar- gramme has been selec- ric. ments are not suf- ted (e.g. Synthetic in- ficiently smooth. stead of Cotton). Excessive laundry load. Reduce the laundry load The drum is emp- It is necessary to set a...

  • Page 31: Installation

    Cotton 9 kg Spin speed Maximum 1400 rpm (L 98499 FL) 1600 rpm (L 98699 FL) 1) Connect the water inlet hose to a water tap with a 3/4'' thread. INSTALLATION UNPACKING 1. Use the gloves. Remove the exter- nal film. Use a cutter, if it is necessa- 2.
  • Page 32 5. Open the door. Remove the poly- styrene piece from the door seal and all the items from the drum. 6. Put the polystyrene front piece on the floor behind the appliance. Carefully put down the appliance with the rear side on it. Make sure that the hoses are not damaged.
  • Page 33 ENGLISH 9. Make sure to identify the different sizes and the positions of the sound barriers. Refer to the illustration: A ( FRONT ) = Front of the appli- ance B ( BACK ) = Rear of the appliance 10. – Remove the adhesive strip from the silent barriers.
  • Page 34 13. Turn the three bolts with the key supplied with the appliance. Pull out the plastic spacers. 14. Replace the plastic spacers with the plastic caps. You can find these caps in the user manual bag. WARNING! We recommend that you keep Remove all the packaging and the packaging and the transit the transit bolts before you in-...
  • Page 35 ENGLISH • The appliance must be level and sta- ble. CAUTION! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the lev- THE INLET HOSE • Connect the hose to the appliance. Turn the inlet hose only left or right. Loose the ring nut to set it in the cor- rect position.
  • Page 36 WATER-STOP DEVICE The inlet hose has a water stop device. This device prevents damage of water leaks in the hose because of its natural ageing. The red sector in the window «A» shows this fault . If this occur, close the water tap and contact the service centre to replace the hose.
  • Page 37 ENGLISH Without the plastic hose guide. • To a sink spigot. Refer to the illustration. Put the drain hose in the spigot and tighten it with a clip. Make sure that the drain hose makes a loop to prevent that remain- ing particles go in the appliance from the sink.
  • Page 39 ENGLISH...
  • Page 40 132940570-A-432010...

This manual is also suitable for:

L 98499 fl

Table of Contents