Base Unit Ringer Tone - Panasonic KX-TG5230C Operating Instructions Manual

Base unit ringer tone

Base Unit
Make sure the base unit is not being used.
1
Press [f] or [g].
• The base unit will ring using the current ringer tone. If the ringer volume has
been turned off, the base unit will not ring (p. 19).
2
Press [f] or [g] repeatedly to select the desired tone.
• Each time you press [f] or [g]
selected.
• To stop ringing, press [0].
• You can also select the ringer tone by pressing [1] to [7].
[1] to [3]: Bell ringer patterns
[4] to [7]: Melody patterns
Selecting the base unit ringer tone by using the
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Set base unit" by pressing [d]
or [B], then press the soft key (
4
Press the soft key (
tone".
5
Select the desired ringer tone by pressing
[d] or [B].
• When selecting the ringer tone, the base unit will
ring. If the base unit ringer volume has been
turned off, the base unit will not ring (p. 19).
• You can also select the ringer tone by pressing
[1] to [7].
[1] to [3]: Bell ringer patterns
[4] to [7]: Melody patterns
6
Press the soft key (
Programmable Settings
(use either the handset or the base unit)
,
another ringer tone will be heard and
SELECT
SELECT
) at "Ringer
SELECT
), then press [OFF].
SAVE
Handset
Initial setting
).
Set base unit
).
Ringer tone
Ringer tone
1:Tone 1
21