Table of Contents
Advertisement
Cancelling Registration/Re-registration
Make sure the base unit and the other handsets are not being used. Have both
the handset and base unit nearby during registration.
If you have cancelled handset registration at a previous base unit (p. 69), start
from step 5.
1
Handset: Press [MENU].
2
Handset: Scroll to "Initial setting" by
pressing [d] or [B], then press the soft key
(
).
SELECT
3
Handset: Scroll to "Registration" by
pressing [d] or [B], then press the soft key
(
).
SELECT
4
Handset: Press the soft key (
registration".
5
Base unit:
Press and hold [LOCATOR/INTERCOM/TRANSFER] for 3 seconds.
• The CHARGE indicator flashes. After the CHARGE indicator starts flashing,
the rest of the procedure must be completed within 1 minute.
6
Handset:
(1) Press the soft key (
(2) Wait until a long beep sounds and the
display shows the new extension number
(e.g. extension number 2).
• Registration is complete.
• You can stop registration by pressing [OFF] on the handset and pressing
[LOCATOR/INTERCOM/TRANSFER] on the base unit.
• If "Wrong handset Refer to manual" is displayed, the handset you tried to
register is for KX-TG6500C base unit, not the KX-TG5230C base unit included
with this system. The accessory handsets for this base unit are KX-TGA520C and
KX-TGA523C.
If you have not cancelled the handset's registration at the previous base unit
(p. 69), the handset number remains in that base unit's memory. To erase the
handset number from the previous base unit, see the base unit's Operating
Instructions. For the KX-TG5230C base unit: (1) Press and hold [LOCATOR/
INTERCOM/TRANSFER] for 3 seconds, and (2) Press and hold the handset
( ) to
number [1]
sounds, then the handset number is erased.
70
SELECT
).
O K
( )
[4]
that you do not want for 5 seconds. A long beep
Initial setting
Registration
) at "HS
HS registration
Press LOCATOR
on base unit
for 3 sec.
Then press OK
BACK
IN USE
Handset [2]
L
O K
SPIPRIVACY1
[2]
Registered
Hide quick links:
Advertisement
Table of Contents
