Base Unit Handset; Incoming Call Tone - Panasonic KX-TG4000B Operating Instructions Manual

Other Programmable Functions

Incoming Call Tone

While using one line, you can be informed if another call arrives on the
other line by two tones. During an intercom call or while listening to
messages (p. 67, 70), you can also be informed by two tones if a call
arrives. If you set to ON, this incoming call tone will be heard for as long as
the other line rings. To delete this incoming call tone, set to OFF. To set
the incoming call tone to sound twice, set to "2". Your base unit comes
from the factory set to OFF. Your cordless handset comes from the factory
set to ON.
Programming must be carried out separately for the base unit and
cordless handset(s).
Make sure that the base unit/cordless handset is in the standby mode.
1
Press
(FUNCTION)
2
Press or
points to "Ringer setting",
and press H.
3
Press or
points to "Incoming call",
and press H.
The current setting is displayed.
4
Select the desired setting, "2",
"On" or "Off", by pressing
.
I n c o m i n g c a l l
E N T E R = S a v e
50

Base Unit Handset

5
.
until the arrow
until the arrow
or
t o n e : 2
Press .
(ENTER)
A beep sounds.
To return to the standby mode,
press (EXIT).