Programmable Settings; Programming Guidelines Base Unit Handset - Panasonic KX-TG4000B Operating Instructions Manual

Programmable Settings

Programming Guidelines
This unit has various programmable functions. Most of them are selected
from the function menu on the display (p. 22).
(ENTER)
How to select a function item from the menu
1. Press
(FUNCTION)
displayed.
2. You can scroll through the menu by
pressing or
item and point the arrow to the item
by pressing
3. Press H to select the item.
4. If the selected item has a sub-menu, it will be displayed. Select the sub-
menu item by pressing
5. You can then select the desired setting.
is used to select or save a programming setting.
(ENTER)
6. When programming is complete, a confirmation tone sounds. The
display will return to the main menu or the sub-menu (if the function item
is in the sub-menu). You can continue programming other items. To
return to the standby mode, press
Useful information:
You can go back to the previous display by pressing I except when entering
characters or numbers. To return to the main menu from the sub-menu, press I.
You can exit the programming mode any time by pressing
If you do not press any buttons for 60 seconds, the unit will return to the standby
mode.
If the unit detects a problem, an error message will be displayed (p. 92).
18
(FUNCTION)
(EXIT)
Navigator Key
, H, I)
( ,
while in the standby mode. The main menu is
. Find the desired
or .
, and press H.
or
(EXIT)
Base Unit Handset
Navigator Key
(
(ENTER)
(FUNCTION/EXIT)
Base Unit
Ex. "Ringer setting" is at the arrow.
S a v e d i r e c t o r y
D a t e a n d t i m e
H R i n g e r s e t t i n g
.
.
(EXIT)
, H, I)
,