Advertisement

Quick Guide

Connections
Base unit
1 Connect the AC adaptor to the unit by pressing the plug firmly.
2 Fasten the cord by hooking it.
3 Connect the AC adaptor to the power outlet.
4 Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click.
5 A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service.
Note:
L Use only the supplied Panasonic AC adaptor PNLV226.
1
2
Charger
1 Connect the AC adaptor to the power outlet.
Printed in Malaysia
KX-TGE260/KX-TGE262/KX-TGE263
Model No.
KX-TGE264/KX-TG454SK/KX-TGE270
KX-TGE272/KX-TGE273/KX-TGE274
3
4
KX-TGE275/KX-TG465SK
4
5
PNQW3881ZA
1
TT1113WK0

Advertisement

Table of Contents
loading

Summary of Contents for Panasonic KX-TGE260

  • Page 1: Quick Guide

    4 Connect the telephone line cord to the unit, then to the single-line telephone jack (RJ11C) until you hear a click. 5 A DSL/ADSL filter (not supplied) is required if you have a DSL/ADSL service. Note: L Use only the supplied Panasonic AC adaptor PNLV226. Charger 1 Connect the AC adaptor to the power outlet.
  • Page 2: Battery Installation/Charging

    Battery installation/Battery charging Charge for about 7 hours. Note: L USE ONLY rechargeable Ni-MH batteries AAA (R03) size ( L Do NOT use Alkaline/Manganese/Ni-Cd batteries. L Confirm correct polarities (S, T). L Follow the directions on the display to set up the unit. L Confirm “Charging”...
  • Page 3: Recording Greeting Message

    L The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Panasonic Corporation is under license. L All other trademarks identified herein are the property of their respective owners.
  • Page 4: Pairing Bluetooth Cellular Phone

    Link to cell Pairing a Bluetooth cellular phone Handset: For CELL 1: {MENU}(6241 For CELL 2: {MENU}(6242 L After the corresponding CELL indicator on the base unit starts flashing, the rest of the procedure must be completed within 5 minutes. Your cellular phone: While the corresponding CELL indicator is flashing, follow the instructions of your cellular phone to enter the pairing mode.
  • Page 5: Connecting/Disconnecting Cellular Phone

    Link to cell Connecting/disconnecting the cellular phone Auto connection to the Bluetooth devices (cellular phones or headset) The unit connects to the Bluetooth devices at regular intervals if the connection is lost. To change the interval (default: “1 min”), see the operating instructions. L When 3 Bluetooth devices (2 cellular phones and 1 headset) are paired to the base unit, only 2 Bluetooth devices can be used with the unit at the same time, and the base unit loses its connection from other Bluetooth devices.
  • Page 6: Basic Operations

    Basic operations Making/Answering calls (Handset) To adjust the receiver/ Press {+} or {-} repeatedly while talking. speaker volume Making a call using the {>} REDIAL s {r}: Select the desired phone number. redial list To make a cellular call: When only 1 cellular phone is paired: {CELL} When 2 cellular phones are paired: {CELL} s {r}: Select the desired cellular phone.
  • Page 7: Phonebook

    Basic operations Phonebook (Handset) Adding entries {<} k s {MENU} {r}: “Add new entry” s {SELECT} Enter the party’s name (16 characters max.). s {OK} Enter the party’s phone number (24 digits max.). s {OK} {r}: Select the desired group. s {SELECT} 2 times s {OFF} Making calls {<} k s {r}: Select the desired entry.
  • Page 8: Phonebook Transfer

    Using Bluetooth devices Copying phonebook entries from a Bluetooth cellular phone (phonebook transfer) You can copy phonebook entries from the paired cellular phones or other cellular phones (not paired) to the unit’s phonebook. Handset: {MENU}(618 Handset: To copy from paired cellular phones: {r}: Select the desired cellular phone.
  • Page 9: Using Bluetooth Headset For Landline Calls

    When you finish talking, turn off your headset referring to your headset operating instructions. L If you cannot hang up the call using your headset: − press {P} (STOP) on the base unit. (KX-TGE260 series) − press {s} on the base unit 2 times. (KX-TGE270 series)
  • Page 10: Faq

    L If the same problem occurs even if the handset is next to the base unit, please visit: http://www.panasonic.com/support Can I add another L Yes, you can add up to 6 handsets (including the handset(s) sold accessory handset to my with your base unit) to a single base unit.

Table of Contents