Canceling Cordless Handset Registration; Base Unit & Handset - Panasonic KX-TG4000B Operating Instructions Manual

Canceling Cordless Handset Registration

If you no longer need to use a cordless handset or if you need to register a
handset to a different base unit of the same model, it may be necessary to
cancel the registration.
Only one handset can be canceled at a time. Make sure that the base
unit and cordless handset are in the standby mode.
Base unit
1
Press
(FUNCTION)
2
Press or until the arrow
points to "Registration", and
press H.
3
Press or until the arrow
points to "Deregistration",
and press H.
The registered handset numbers
are displayed.
D e r e g i s t e r i n g
H S N o . : 1 2 3 4 5 6 7 8
IH
E N T E R = S e t
Press I or H to move the
4
cursor to the handset number to
be canceled.
5
Press .
(ENTER)
D e r e g i s t e r ?
H a n d s e t 3
I = N o
C L E A R = Y e s
To stop, press I.
6
Press .
(CLEAR)
A long beep sounds and "Clear"
is displayed.
To cancel registration of another
handset, start again from step 3.
To return to the standby mode,
press (EXIT).
Cordless handset
1
. Press
2
Press
points to "Registration", and
press H.
3
Press
points to "Deregistration",
and press H.
4
Press
The canceling procedure must be
carried out with both the base unit
and the cordless handset.
The cordless handset will not work. To
use it again, registration will be
required (p. 19, 52).
Base Unit & Handset
.
(FUNCTION)
or until the arrow
or until the arrow
Deregister?
Handset3
I =No
CLEAR=Yes
To stop, press I.
.
(CLEAR)
A long beep sounds and "Clear"
is displayed.
To return to the standby mode,
press (EXIT).
[–] will be displayed.
53