Handset Battery Replacement; Backup Battery Replacement - Panasonic KX-TG4000B Operating Instructions Manual

2.4ghz multi-handset cordless phone system
Hide thumbs Also See for KX-TG4000B:
Table of Contents

Advertisement

Handset Battery Replacement

If "Recharge" is displayed and/or "
replace the battery with a new Panasonic HHR-P506 (PQHHR150AA21)
battery. To order, call the accessories telephone number on page 3.
1
Remove the cover by sliding
while pressing the arrow.
2
Replace the battery, and close
the cover.
3
Be sure to charge the new
battery for about 8 hours in
order to display the battery
strength prompt correctly
(p. 17).
T
he handset battery is a Nickel-Metal Hydride battery. You cannot recycle this
battery.

Backup Battery Replacement

Even if the backup battery has been fully charged, the BATTERY indicator
may flash or the unit may not work within minutes after a power failure. In
that case, replace the battery with a new Panasonic P-P507 (PQP50AA61)
battery. To order, call the accessories telephone number on page 3.
Disconnect the telephone line cords, and open the battery cover by
pushing down the tab. Replace the battery and close the battery cover and
then reconnect the telephone line cords.
Attention:
The product you have purchased is powered by a nickel cadmium
battery which is recyclable. At the end of its useful life, under
various state and local laws, it is illegal to dispose of this
battery into your municipal waste stream. Please call
1-800-8-BATTERY for information on how to recycle this battery.
" flashes after being fully charged,
H
89

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents