Playback; Basic Playback Procedure - Yamaha RX-A3000 Owner's Manual

PLAYBACK

SOURCE RECEIVER

Basic playback procedure

AV
Turn on external components (TV, DVD
1
1 2 3 4 4
player, etc.) connected to this unit.
5 6 7 V-AUX
AUDIO d
1 2 3 4
dInput selector
2 Use the
PHONO MULTI USB NET
source.
DOCK TUNER [ A ] [ B ]
The name of the selected input source is displayed on
the front panel display.
When USB, NET, DOCK or TUNER is selected, the
n
MUTE VOLUME
content window is displayed (
o
Play the external component that you have
3
selected as the source input, or select a
radio station on the tuner.
Refer to the instruction manuals provided with the
external component for details on playback.
x
HDMI OUT
For details on the following operations, refer to the
corresponding pages:
TUN./CH • "FM/AM tuning" (
• "Playing back tunes on the PC" (
• "Playing back tunes on the USB storage devices"
( p. 71)
• "Listening to the Internet Radio" (
• "Playing back tunes from your iPod™/iPhone™"
( p. 76)
• "Playing back tunes from Bluetooth™ components"
( p. 80)
J
1 : You can change the input source name displayed on the front
panel display as necessary (
Press
4
To mute the output.
to select the input
oMUTE
Press
oMUTE
Press
J1
p. 65).
p. 66)
p. 69)
p. 73)
p. 85).
nVOLUME +/-
to adjust the volume.
to mute the audio output.
again to unmute.
Selecting the active HDMI OUT jack
Use this function to select the HDMI OUT jack(s) used
to output signal.
xHDMI OUT
Press repeatedly to select setting.
The HDMI output setting changes as follows.
HDMI OUT Sel. HDMI OUT Sel.
OUT 1+2 OUT 1
HDMI OUT Sel. HDMI OUT Sel.
Off OUT 2
OUT 1+2 Outputs the signal at both the HDMI OUT 1
and HDMI OUT 2 jacks simultaneously.
OUT 1 Outputs the signals at the HDMI OUT 1 jack.
OUT 2 Outputs the signals at the HDMI OUT 2 jack.
Off
Any signals are not output at the HDMI OUT 1
and HDMI OUT 2 jacks. Select this setting
when you do not use the video monitor
connected to one of the HDMI OUT jacks.
• The HDMI OUT jack that utilizes the HDMI Control
function can be selected with "Control Select"
( p. 104).
• When "HDMI Control" is set to "On," the HDMI OUT
jack selected with "Control Select" is automatically
enabled in addition to the HDMI OUT jack selected
here by commands from the external component
supporting HDMI Control connected to the jack
( p. 104).
• The active HDMI OUT jack(s) can be registered with
the SCENE function ( p. 87).
En
51