Playing Back Tunes From Bluetooth™ Components; Connecting A Yamaha Bluetooth Wireless Audio Receiver; Pairing Bluetooth™ Components - Yamaha RX-A3000 Owner's Manual

Playing back tunes from Bluetooth™ components
SOURCE RECEIVER
You can connect a Yamaha Bluetooth Wireless Audio Receiver (such as the YBA-10, sold separately) to this unit and enjoy wireless playback from Bluetooth-compatible
portable music players.
AV
1 2 3 4
5 6 7 V-AUX
NOTE
AUDIO
1 2 3 4
When playing back from a Bluetooth component for the first time, you must first pair the devices (register the Bluetooth components). When establishing a wireless connection
PHONO MULTI USB NET
you must carry out pairing on both this unit and on the Bluetooth component.
d
DOCK TUNER [ A ] [ B ]
Connecting a Yamaha Bluetooth
Wireless Audio Receiver
Use the dedicated cable to connect the dock to the
DOCK jack on the rear panel of this unit.
p
OPTION
The Bluetooth Wireless Audio Receiver connection will
i
ENTER
be complete when this unit is turned on.
RETURN
y
MEMORY
TUN./CH
Yamaha Bluetooth
Wireless Audio Receiver
CAUTION
To prevent accidents, switch this unit to standby mode
before connecting a Bluetooth Wireless Audio Receiver.
J
1 : This unit supports A2DP (Advanced Audio Distribution Profile)
of the Bluetooth profile.
J
2 :
Depending on Bluetooth components, wireless connection is
carried out right after the pairing. In this case, "BT connected" is
displayed instead of "Completed."
J1
Pairing Bluetooth™ components
Be sure to carry out pairing when connecting a Bluetooth
component for the first time, or when settings have been deleted.
Refer to the operating instructions of your Bluetooth
component as necessary when carrying out pairing.
The Yamaha Bluetooth Wireless Audio Receiver can
be paired with up to eight Bluetooth components.
DOCK NETWORK When the ninth device is paired, the pairing settings
for the device which has not been used for the longest
AV 1 AV 2 AV 3 AV 4
(1 BD/DVD)
period of time will be deleted.
PHONO
GND
1 Press
COAXIAL COAXIAL OPTICAL OPTICAL
Turn on the Bluetooth component you want
2
ANTENNA
FM (4 RADIO)
GND AM
75
to pair with and set it to pairing mode.
Press
3
and use
dDOCK
to switch to the DOCK input.
pOPTION
to display the Option menu
iCursor B / C
to select "Pairing."
O p t i o n
VOLUME
P a i r i n g
PLAYBACK
Playing back tunes from Bluetooth™ components
iENTER
4 Press to start pairing.
S e a r c h i n g . . .
i
• To cancel pairing, press RETURN.
y
• You can also press and hold MEMORY
panel to begin pairing.
Make sure the Bluetooth component
5
recognizes the Bluetooth Wireless Audio
Receiver.
When the device is recognized, it will appear in the
Bluetooth component list, for example as "YBA-10
YAMAHA."
Select the Bluetooth Wireless Audio
6
Receiver from the Bluetooth component
list, and enter a pass key "0000" into the
J2
Bluetooth component.
When pairing occurs correctly
C o m p l e t e d
VOLUME
on the front
VOLUME
80
En