Setting The Audio Output Function Of This Unit - Yamaha RX-A3000 Owner's Manual

SOURCE RECEIVER
Front L / Front R / Center / Surround L / Surround R /
Surround Back L / Surround Back R / Front Presence L /
Front Presence R / Rear Presence L / Rear Presence R /
AV
Subwoofer1 / Subwoofer2
1 2 3 4
5 6 7 V-AUX
AUDIO
The parametric equalizer can be used to manually adjust
1 2 3 4
sound quality for individual speakers.
PHONO MULTI USB NET
Set "PEQ Select" to "Manual" and use "PEQ Data
DOCK TUNER
[ A ] [ B ]
Copy" to copy information acquired with automatic
setup. This information can be used as a basis for
performing manual adjustments.
iCursor B / C
1 Use
h
"Band / Gain," "Freq. / Gain," or "Q / Gain"
and press iENTER.
ON SCREEN
i
ENTER
iCursor D / E
Use
2
parameter and use
repeatedly to adjust the gain.
iENTER
3 Press
Repeat steps 1 to 3 to configure other
4
parameters.
To reset all parameter settings for the selected
speaker, select "Yes" in "Reset" and press iENTER.
hON SCREEN
Press
5
Test Tone
Turns the test tone generator on or off.
Off (Default)
On
You can use the test tone in a variety of
circumstances. For example, you can adjust the
repeatedly to select volume balance settings for each speaker, or
whenever you adjust the settings on the internal
parametric equalizer, you can listen to the actual
effect while operating this unit. Turn the test tone off
repeatedly to adjust the
when you have finished making adjustments.
iCursor B / C
to exit the edit window.
to close the menu.
Setting the audio output function of
this unit
Does not generate test tones.
Generates test tones. While "On" is
selected, test tones are produced
constantly.
Sound setup items
Lipsync
Dynamic Range
Max Volume
Initial Volume
Pure Direct Mode
Adaptive DSP Level
SETUP
Setting various functions (Setup menu)
Adjusts the delay between video and
audio output.
Selects the dynamic range adjustment
method for Dolby Digital and DTS
playback.
Sets the maximum volume for this
receiver.
Sets the initial volume for when this
receiver is turned on.
Selects whether or not this unit outputs
video signal in Pure Direct Mode.
Adjusts the level of DSP effect in
conjunction with the volume level.
100
En