Yamaha RX-A3000 Owner's Manual page 79

SOURCE RECEIVER
Place the iPod/iPhone in the wireless transmitter. Setup
is complete.
AV
1 2 3 4
i P o d c o n n e c t e d
5 6 7 V-AUX
AUDIO
1 2 3 4
PHONO MULTI USB NET
d
DOCK TUNER
[ A ] [ B ]
Receiver of the Wireless
System for iPod
Position the receiver as far as possible
from the unit.
When this unit is in standby mode, iPod/iPhone can be
charged automatically, if "Standby Charge" is set to
"Auto" ( p. 86) or "Power & Input" of "iPod Interlock"
is set to "On" (
J
1 : This function is also activated when sound of application is
reproduced or ringtone is received.
VOLUME
DOCK NETWORK
AV 1 AV 2 AV 3 AV 4
(1 BD/DVD)
PHONO
GND
COAXIAL COAXIAL OPTICAL OPTICAL
ANTENNA
FM (4 RADIO)
GND AM
75
p. 86).
Use iPod/iPhone to start playback.
• This unit, which is placed in the main zone, functions as
follows when iPod/iPhone controls are used to start
playback.
– The input source switches to DOCK (iPod) when this
unit is turned on.
– When this unit is in standby mode when iPod/iPhone
playback starts, this unit turns on and the input source
J1
switches to DOCK (iPod).
• This unit automatically enters standby mode when the
following operations are performed.
– iPod/iPhone is removed from the YID-W10
– iPod/iPhone is not operated for a while after playback
is stopped
d
• Pressing DOCK also switches the input source to
DOCK (iPod).
• When a menu is operated, this function is not
activated.
• When "iPod Interlock" → "Power & Input" in the
Input menu is set to "Off," the power and the input
source do not switch automatically ( p. 86).
PLAYBACK
Playing back tunes from your iPod™/iPhone™
• Adjusting volume control on the iPod/iPhone also adjusts
the volume (max 0.0 dB) of this unit.
• When "iPod Interlock" → "Volume" in the Input menu
is set to "Off," the volume of this unit is not adjusted
when iPod/iPhone volume controls are adjusted
( p. 86).
• This unit may restrict the volume level to prevent
excessively loud play back. In such a case, gradually
increase the volume level.
CAUTION
When iPod/iPhone controls are used to adjust volume,
playback volume may be unexpectedly loud. This
could result in damage to this unit or the speakers. If
the volume suddenly increases during playback,
immediately remove the iPod/iPhone from the
Wireless System for iPod. "Max Volume" can be used
to specify the maximum volume level to prevent
excessively loud playback ( p. 101).
En
79