Yamaha RX-A3000 Owner's Manual page 99

Extra Bass
Allows the front channel low-frequency components to be
produced exclusively by the subwoofer, or by both the subwoofer
and the front speakers.
Off (Default) Depending on the size of the front speakers, either the
front speakers or the subwoofer produce the front
channel low-frequency components.
On The subwoofer and the front speakers produce the
front channel low-frequency components.
When "Subwoofer1" and "Subwoofer2" are set to "None" or
"Front" is set to "Small," "Extra Bass" is disabled.
Distance
Adjusts the timing at which the speakers produce audio so that
sounds from the speakers reach the listening position at the same
time.
Selecting adjustment units
iCursor B / C
Use to select the unit for distance (meters or
feet), and press iENTER.
Setting distances for each speaker
iCursor B / C
Use to select the speaker you want to configure,
and press iENTER.
iCursor D / E
Then use to set the distance from the speaker to
your listening position.
Adjustable range 0.30 m to 24.00 m (1.0 ft. to 80.0 ft.)
Default setting 3.00 m (10.0 ft.)
Adjustment 0.05 m (0.2 ft.)
increments
Level
Separately adjusts the volume of each speaker.
iCursor B / C
Use to select the desired speaker, and press
iENTER.
iCursor D / E
Then use to adjust the volume for the selected
speaker.
Adjustable range -10.0 dB to +10.0 dB
Default setting 0.0 dB
Adjustment 0.5 dB
increments
You can also adjust the volume of each speaker by using
ALEVEL.
iCursor B / C
ALEVEL
Press and use
iCursor B / C
speaker. Then use to adjust the volume for the
selected speaker.
Parametric EQ
Adjusts sound quality of tone using a parametric equalizer.
PEQ Select
Select an equalizer type.
Manual Manually adjust equalizer sound.
Flat Adjust individual speakers to achieve the same
characteristics. Select this option if speakers offer the
same quality.
Front Adjust individual speakers to achieve the same
characteristics as the front left and right speakers.
Select this option if front left and right speakers offer
significantly greater quality than other speakers.
Natural Adjust all speakers to achieve a natural sound. Select
this if high-frequency sounds seem too strong when
"PEQ Select" is set to "Flat."
Through (Default) Disable the equalizer.
PEQ Data Copy
Select 1 of the 3 parametric equalizer types acquired with automatic
setup and manually copy that information to the manual adjustments.
Flat Manual
Front Manual
Natural Manual
to select the desired
SETUP
Setting various functions (Setup menu)
Copy the "Flat" parametric equalizer information
acquired with automatic setup.
Copy the "Front" parametric equalizer information
acquired with automatic setup.
Copy the "Natural" parametric equalizer information
acquired with automatic setup.
99
En