Recording - Panasonic SJ-MR100 Operating Instructions Manual

[OPT/LINE IN]
1
A
a
b
c
[OPT/LINE IN]
B
(R) (L)
C
L
E O
E R
S T
R
d
A
2
HOLD
3
18
[(PLUG IN POWER)MIC]
3.5 mm stereo
B
MAIN
SUB HOLD
2
4
ENGLISH

Recording

1
Connect this unit to a unit that
has a digital output terminal.
a Digital output terminal
Purchase an optical fiber cable
(RP-CA2220, sold separately).
b Digital output terminal
Purchase an optical fiber cable
(RP-CA2120, sold separately).
Connect this unit to a unit that
has stereo LINE OUT terminals.
c LINE OUT terminal
Note.
Disconnect other cables from the [(PLUG
IN POWER) MIC] terminal.
Connect the microphone.
d Stereo microphone (not included)
Purchase a stereo microphone
(RP-VC200, sold separately).
Note.
≥Disconnect other cables from the
[OPT/LINE IN] terminal.
≥Stereo recording is made if a stereo mi-
crophone is used.
2
Release hold.
A Main unit
B Remote control
3
Open the player and insert a
recordable MD.
1 Slide [OPEN
OPEN
2 Open the lid.
1
3 Insert disc with label facing upward.
4 Close the lid.
After an MD has been inserted the player
turns on, reads the information from it, then,
after a minute, the power goes off again.
3
Digital recording
(portable()portable)
(deck()portable)
Analogue recording
Recording with a microphone
] to the right.
Push the disc in the center until it
locks in place.
A
B
C