Optional Framing Kit - Regency Horizon HZ54E Owners & Installation Manual

installation
|
16

OPTIONAL FRAMING KIT

1. Construct the wood framing, ensure the inside dimensions is
63" W x 50-1/*4" H
50-1/4"
2. Bend both nailing strips from the sides of the appliance until positioned
as shown below.
Determine the overall combined thickness of the non-combustible board
+finished material being used. The nailing strips can be adjusted 3-1/8".
3. Adjust nailing strips by loosening 2 screws on each nailing strip - adjust
and retighten the screws
4. Attach both vertical studs (478-015) and secure using 6 screws (2 at
bottom, 2 at top and 2 on the sides) as shown
NOTE: Ensure the flat side of the steel stud is facing the wood framing.
16 |
®
Regency Horizon HZ54E-10 Gas Fireplace
919-441
OPTIONAL FRAMING KIT
5. Secure horizontal steel header with 2 screws per diagram
(478-016)
6. Slide the unit in position. Hook up gas, venting and electrical and fan (if
purchased) prior to installing the remaining horizontal steel studs.
7. Secure 3 horizontal steel studs (478-016) with 2 screws on each end. 2 at
the top and one at the bottom as shown.
1
HZ54E-10
Flat side out
(478-015)
1
2
3
09.15.14