Switching To - Mercedes-Benz COMAND Operator's Manual

Media Interface
138
USB socket for connecting a USB device
3
Example device: iPod
4
X
Connect the external device using
appropriate connection 1, 2 or 3.
Never connect more than one device at a
time. You will otherwise not be able to play
back from the external device.
COMAND activates the device.
If you remove a device, the No Device
Connected message appears.
i The connected iPod or USB device should
not be operated with a remote control
(such as a Bluetooth remote control) while
it is being operated with Media Interface,
as this could cause unforeseen technical
difficulties.
i The initialisation period may be extended
if you connect an iPod or USB device which
has a fully discharged battery.
i Error messages appear while the device
is being activated if:
you have connected two devices at the
R
same time
COMAND does not support the device
R
connected
the device connected consumes too
R
much power
the Media Interface connection is
R
defective
If necessary, consult a Mercedes-Benz
Service Center.
Switching to Media Interface
From Another Main Function
X
Select Audio£Audio£Media
Interface in the audio menu display.
i If you previously selected operation with
Media Interface, you need only select
Audio.
or
X
Press the e function button.
Switch on the previous disc operating
mode.
i If you previously selected operation with
Media Interface, it will now be switched on.
X
Press number key "9".
This will automatically select the audio
device connected.
or
X
Select Media.
The media list appears. The R dot
indicates the current medium being played.
X
Rotate or slide
ymz
is highlighted in the media list.
i If no device is connected, you will see the
entry Media Interface instead of a
device name.
If COMAND does not support the device
connected or if two devices have been
connected, the Not available entry
appears.
X
Press n.
COMAND activates the connected device.
You will see a corresponding message. The
basic display then appears.
Example display: iPod operation
Device type
1
Track number
2
Track name
3
Visual elapsed track time
4
Numeric elapsed track time (also in
5
format 00:00:00 for audiobooks)
until position 9
qmr