Storing Stations - Mercedes-Benz COMAND Operator's Manual

Tuning to a Station via the Station
Memory
X
Select Presets in the radio display.
or
X
Press n when the main area is highlighted.
The station memory appears. The dot R in
front of a preset indicates that the currently
tuned station is stored there.
X
To select a station: Rotate
qmr.
X
To tune to a station: Press n.
or
X
Press a number key, e.g. 4, on the control
unit.
Wavebands
AM (MF)
FM (VHF)
WB (Weather Band)

Storing Stations

There are 10 presets available for FM, AM and
SatRadio wavebands.
Storing Stations Manually
X
Press n when the main area is highlighted.
or
X
Select Presets in the radio display.
In both cases, the station memory will
appear. The dot R in front of a preset
station indicates the station the radio is
currently tuned to.
or slide
ymz
Frequency
530 - 1700 kHz
87.7 - 107.9 MHz
Weather channels
Station memory
X
To store a station to a selected preset:
Press and hold n until a signal tone
sounds.
or
X
Press and hold a number key, e.g. 4, until
a signal tone sounds.
The station is stored.
Storing via Autostore
i The function automatically assigns
receivable stations to the presets, sorted
according to reception quality. The stations
which were stored in the station memory
manually are overwritten.
X
Press n when the main area is active.
X
Select Autostore.
or
X
Select Presets£Autostore in the radio
display.
COMAND searches for receivable stations.
A corresponding message is displayed. The
available stations are automatically stored
under the presets.
Canceling Autostore Procedure
X Select Cancel.
Radio
115
Z