Displaying Information - Mercedes-Benz COMAND Operator's Manual

Satellite Radio
120
Storing Channels Manually
X
Press n if the main area is highlighted.
or
X Select Presets on the SatRadio submenu
bar.
In both cases, the channel memory will
appear. The dot R in front of a preset
indicates that the currently tuned channel
is stored there.
Station Memory
X
To select a preset: Rotate
qmr.
X
To store a channel to a selected preset:
Press and hold n until a signal tone
sounds.
or
X
Press and hold a number key, e.g. 4, until
a signal tone sounds.
The channel is stored.
Storing via Autostore
i The function automatically assigns
receivable channels to the presets. The
channels which were stored in the channel
memory manually will be overwritten in this
process.
X
Press n when the main area is active.
X
Select Autostore.
or
X
Select Presets £Autostore from the
SatRadio submenu.
COMAND searches for receivable
channels. A corresponding message is
displayed. The available channels are
automatically stored under the presets.
Canceling storage procedure
X Select Cancel.
Selecting a Channel from the Memory List
X
To call up the channel list: In the
submenu rotate
Presets is highlighted.
The presets list appears.
X
To select a channel: Rotate
qmr.
X
To tune to the selected channel:
Press n.
or slide
ymz
or
X
Press a number key, e. g. 4 on the control
unit.

Displaying Information

X
In the submenu rotate
until Info is highlighted.
X
Press n.
Information about the current program
appears.
or slide until
ymz omp
or slide
ymz
or slide
ymz omp