Display; Displays; Hands-Free System; Basic Functions - Mercedes-Benz Hands-free system Operating Instructions Manual

Basic functions

10

Displays

Display of Bluetooth
Blue status LED C, informs on the status of
®
the Bluetooth
In the basic setting, the status LED does not
light up, in order to avoid causing a distrac-
tion. Pressing the ~ button, however, calls
up the status of the Bluetooth
LED Status
Does not light up
after the ~ but-
ton has been
pressed
Lights up for 10 sec-
onds (standard)
after pressing the
~ button
Flashes slowly
Flashes rapidly
®
function
connection.
®
connection.
®
Bluetooth status
The hands-free
R
system is deacti-
vated because the
run-on time has
been exceeded
( Y page 10), or
There is no mobile
R
phone connected
to the hands-free
system. The
"Automatic recon-
nect" function is
active
( Y page 15).
A mobile phone
and/or navigation
device is connected
to the hands-free
system.
The pairing process
is taking place and
the hands-free sys-
tem is visible to
other devices. The

hands-free system

can create a Blue-
®
tooth connection
to a mobile phone or
a navigation device.
A fault has occurred
during the pairing
process.
Basic functions
Activating
The hands-free system is activated automat-
ically with the vehicle ignition. The button illu-
mination is only switched on in night mode.
The hands-free system immediately attempts
to establish a Bluetooth
your mobile phone. The precondition for a
successful connection via Bluetooth
previous pairing of the hands-free system
with one or more mobile phones
( Y page 14).
Switching off
Deactivation of the hands-free system is
delayed by the run-on time. During the run-on
time, the hands-free system remains fully
available. The run-on time begins, as soon as
the ignition is switched off. The run-on time is
stopped during a call for up to two hours.
After two hours have passed, the hands-free
system is deactivated, regardless.
The run-on time can be set at a Mercedes-
Benz Service Centre using the vehicle diag-
nosis system. The standard setting is 30 sec-
onds.
Pairing the mobile phone – quick
guide
X
On the mobile phone, activate Bluetooth
and select the "Mobile phone visible" set-
ting (N mobile phone operating instruc-
tions).
X
Press the 6 and ~ buttons on the
hands-free system simultaneously for
three seconds.
X
Enter the access code 3732 (standard set-
ting) into the mobile phone.
A detailed description of the pairing proce-
dure can be found in the "Mobile phone
pairing" section ( Y
®
connection with
®
, is the
page 14).
®