Loading - Mercedes-Benz COMAND Operator's Manual

CD Audio/DVD Audio/MP3
126
X
Insert a disc into the slot with the printed
side facing upwards.
You see the Please wait... message.
Once the disc is loaded, the DVD changer
switches to the next empty compartment.
You see these messages: Please wait
and then Please insert disc <x>.
X
Repeat the step until all compartments are
loaded.
The DVD changer plays the last disc you
loaded if it has been inserted correctly and
if it is a permissible type.
If loading is not completed, COMAND plays
the first disc inserted.
X
To end loading procedure: Press the Load
8 button again.
or
X
Select Back.
or
X
Press the k button next to the
COMAND controller.
Loading PCMCIA Memory Card
COMAND supports 16-bit full-size type I and
II PCMCIA memory cards.
i COMAND supports commercially
available PCMCIA cards or PCMCIA card
adapters with storage media that may not
be designed for the temperatures which
occur in the vehicle. You should therefore
remove the PCMCIA card from the vehicle
when not in use since extreme
temperatures could damage these devices.
PCMCIA memory card slot
1
X
Push the PCMCIA memory card into the
slot.
The end with the contact must point
towards the slot.
COMAND loads the memory card and
displays the message Reading Memory
Card. If no MP3 tracks can be found, a
message will be displayed.
Ejecting CDs and DVDs
G
Warning
Only eject a disc when the vehicle is
stationary. You may otherwise be distracted
from the traffic conditions and could cause an
accident.
i
If you eject a disc while another is being
played, the DVD changer interrupts
playback. Playback will continue once the
disc has been ejected completely.
Ejecting One Disc
X
Press Eject button 8.
The magazine menu appears. The magazine
compartment containing the current disc is
highlighted.