Mercedes-Benz COMAND Operator's Manual page 35

DTS
MLP
Setting Surround Sound
You can select LOGIC7
in surround sound mode.
X
Select Sound£Surround.
Surround sound setting (display image may differ
depending on model)
® ®
on or LOGIC7 off
Basic Functions of COMAND
X
To select the setting: Rotate
qmr.
X
To save the setting: Press n.
The setting is stored and you exit the menu.
X
To exit the menu without changes: Press
the k button or slide omp.
i Please note the following:
For the optimum audio experience for all
R
passengers when LOGIC7
on, the balance and fade should be set to
the center of the passenger
compartment.
You will achieve the best sound results
R
by playing high-quality audio and video
DVDs.
MP3 tracks should have a bit rate of at
R
least 128 kbit/s.
Surround-sound playback does not work
R
for mono signal sources, such as the AM
waveband in radio mode.
If the radio reception is poor, e.g. in a
R
tunnel, you should switch off LOGIC7
because it may otherwise switch
automatically between stereo and mono
and therefore distort the sound
temporarily.
On some stereo recordings, the sound
R
characteristics may differ from
conventional stereo playback.
33
or slide
ymz
®
is switched
®
Z