Mercedes-Benz COMAND Operator's Manual page 174

Aux Operation
172
X
Display the menu system if necessary
( Y page 168).
X Select DVD-V £ DVD Functions.
X
Select Audio Language.
A selection menu appears after a short
while. The R dot in front of an entry
indicates the currently selected language.
To change a setting: Press ∆ or ∇ until the
X
desired setting has been reached.
X
To save setting: Press the 9.
X
To exit the menu without changes: Press
Y or \.
Subtitles and Camera Angle
i These functions are not available on all
DVDs. The number of subtitle languages
and camera angles available depends on
the content of the DVD. It is possible that
the settings may also be accessed in the
DVD menu.
X
Display the menu system if necessary
( Y page 168).
X
Select DVD-V £ DVD functions.
X Select Subtitles or Camera angle.
Both of these will call up a selection menu
after a few seconds. The R dot in front of
an entry indicates the current setting.
X To change a setting: Press ∆ or ∇ until the
desired setting has been attained.
X
To save setting: Press 9.
X
To exit the menu without changes: Press
\ or Y.
Interactive content
DVDs can also contain interactive content
(e.g. a video game). In a video game, you may
be able to influence events by selecting and
triggering actions. The type and number of
actions depend on the DVD.
To select an action: Press ∆, ∇, \ or Y
X
on the remote control.
X
To trigger an action: Press 9 on the
remote control.
A menu appears and the first entry,
Select, is highlighted.
X
Press 9 on the remote control.
Aux Operation
i You can connect two external video
sources to the display screens (Display
Aux) and additionally one video source to
the DVD drive (Drive Aux).
For further information on external video
sources please refer to the operating guide
of the device.
Connecting an Aux Source
Drive Aux
The Aux connectors of the drive are beside
the Eject button on the front panel of the DVD
drive ( Y page 158).
Display Aux
The display Aux jacks are located on the side
of the screen ( Y page 157).
Connecting an Audio or Video Source
X
Insert the audio jacks for the left and the
right signal into the respective connectors
labeled L and R.
X
Insert the video jack (yellow) into the
connector with the V label.