Memory Functions - Mercedes-Benz COMAND Operator's Manual

X
To select a category: Rotate
omp.
X
To set the selected category: Press n.
The selected category will appear in the
display. The channel last tuned to in the
new category will begin to play.
At the beginning of the category list the
category All Channels will appear. This
category is sorted numerically (by channel
numbers) and allows you to scroll through
all available channels.
Selecting a Channel
You can use the following functions:
Channel search
R
Channel selection via direct entry
R
Selecting a channel from the SatRadio
R
channel list
Selection from the preset menu
R
Channel Search
X
Rotate or slide
ymz
main display is highlighted.
or
X
Press E or F on the control unit.
The search proceeds upwards or
downwards and stops at the next channel
in the selected category.
SatRadio Menu
X
On the submenu bar rotate
until SatRadio is highlighted.
omp
X
Press n.
or slide
ymz
if the SatRadio
omp
or slide
ymz
The SatRadio menu appears.
Entering a Channel Number Directly
X
Select SatRadio£Enter Channel in the
SatRadio menu.
An input dialog appears.
or
X
Press õ on the control unit.
X
To enter a channel: Press corresponding
number buttons on the control unit.
COMAND will tune to the channel entered.
i You can only select numbers that are
currently permissible.
Selecting a Channel from the SatRadio
Channel List
X
Select SatRadio£Channel List in the
SatRadio menu.
The channel list appears.
X
To select a channel: Rotate
qmr
X
To tune to the selected channel:
Press n.

Memory Functions

i There are 10 presets available.
You can use the following functions:
Saving channels manually
R
Selecting a channel from the Satellite
R
preset memory
Satellite Radio
or slide
ymz
Z
119