How To Control Your System Over The Telephone - Honeywell DOMONIAL User Manual

8

How to control your system over the telephone

Control of your system over the phone is only possible from a multi-frequency (tone dialling) or
cellular phone. This function must be configured by the installer.
Remote control is authorised only after you have entered a valid code.
The control panel picks up your call after the number of rings configured by the installer or after
it has been called twice in succession.
REMOTE ACCESS TO YOUR SECURITY SYSTEM
High-pitched
REMOTE ARMING
You can arm a set over the phone if the system
has not been programmed to arm once the final
door is closed.
32
Dial the phone number of your security
system.
A 2-second beep is emitted, followed by
the "Arpeggio" invitation tune.
You then have 30 seconds to enter your
secret code.
A high-pitched beep confirms that the code
is valid. You are then connected to your
security system.
Press keys *, 2, 1 for total set arming.
Press keys *, 2, 2 for partial set arming.
Press keys *, 2, 3 for annex set arming.
Arming is confirmed as soon as you hear
a tune.