Honeywell DOMONIAL User Manual page 15

THE USERS MENU
The USERS item is a very important item in the menu, because all users must key in
their code or present their TAG in order to make any settings or adjustments to the
system or to access information about system status.
Note that some menus are only available using the Master Code or TAG.
ADDING OR MODIFYING CODES
You can add codes or modify existing codes, but all new codes must be at least 2
figures higher than any existing codes.
For example, if a code for an existing user is 2345, you cannot allocate code 2346
►
to someone else, but 2347, 2348, etc.
To modify existing codes:
Select 1-CODES and press
Enter the Master Code or present the Master TAG.
Select a user with
Confirm your choice with
A beep confirms your choice.
Enter the code Authorise the code
Select the user
CODES
CODES
1- USER 1
2- CHRISTOPHER
CHRISTOPHER
3- VIRGINIA
NEW : - - - -
4- WILLIAM
5- SOPHIE
6- ETC...
Press to confirm each screen or
After the last screen, a tone confirms your settings.
to see the list of users.
, as shown in the first screen below.
or press to return to the menu.
CODES
CODES
1- USER 1
2- CHRISTOPHER
CHRISTOPHER
3- VIRGINIA
AUTHORISE CODE?
4- WILLIAM
5- SOPHIE
NO YES 6- ETC...
to cancel.
15